OMG-OCSMP-MBF200 Certification Exam Sample Questions

OMG-OCSMP-MBF200 Dumps PDF, OCSMP Fundamental Dumps, download SysML MBF free Dumps, OMG OCSMP Fundamental exam questions, free online SysML MBF exam questionsYou have to pass the OMG-OCSMP-MBF200 exam to receive the certification from OMG. To increase the effectiveness of your study and make you familiar with the actual exam pattern, we have prepared this OMG OCSMP Fundamental sample questions. Our Sample OMG-Certified Systems Modeling Professional - Fundamental Practice Exam will give you more insight about both the type and the difficulty level of the questions on the OMG SysML MBF exam.

However, we are strongly recommending practice with our Premium OMG-Certified Systems Modeling Professional - Model Builder - Fundamental Practice Exam to achieve the best score in your actual OMG-OCSMP-MBF200 Exam. The premium practice exam questions are more comprehensive, exam oriented, scenario-based and exact match of OMG-Certified Systems Modeling Professional - Fundamental exam questions.

OMG OCSMP Fundamental Sample Questions:

01. A block representing a landing gear actuator must be marked both as safety-critical and as supplier-provided. A profile already loaded into the model provides a stereotype for each of the two classifications.
How does the block come to carry both?
a) Both stereotypes are applied to the block, which carries the properties of each
b) One is applied and the other classification is recorded in a comment on the block
c) The block is specialized into two blocks, each carrying one of the stereotypes
d) A new stereotype combining the two classifications is defined and applied in their place
 
02. A modeler opens the diagram headed act [Activity] Dispense Fuel and draws a new action named Prime Pump on it.
Where does that action now sit in the model?
a) It is owned by the diagram itself, which is what a reader opens to reach it
b) It stands outside the model until a control flow joins it to another action
c) It is owned by the package that holds the diagram rather than by any activity
d) It is owned by the activity Dispense Fuel, which is the element the frame is scoped to
 
03. A review of about 600 requirements against 200 design blocks is unreadable as a requirements diagram, so the team generates a traceability matrix from the same elements and the review then proceeds.
What makes the matrix readable at that size when the diagram was not?
a) It leaves out the requirements that no element satisfies, which removes most of the clutter
b) Every requirement-element pair has a fixed position in the grid, so no relationship has to be drawn as a line
c) It replaces the individual relationships with one summary link for each block
d) It holds fewer relationships than the diagram, because only the links that a reviewer has asked for are generated into it
 
04. A stereotype from a loaded profile is applied to a block. The modeler then fills in the property the stereotype carries, giving it a value on this block.
What is that recorded value called?
a) Metaclass extension
b) Tagged value
c) Default value
d) Constraint parameter
 
05. A team is listing the use cases of an automated teller machine for its use case diagram. Four candidates are on the whiteboard: Withdraw Cash, Enter PIN, Validate Card Number and Write Audit Record.
Which one belongs on the diagram as a use case, and why?
a) Withdraw Cash, because it is a complete goal the customer comes to the machine to achieve
b) Enter PIN, because the customer performs it directly at the machine keypad
c) Validate Card Number, because the system must complete it before any money moves
d) Write Audit Record, because the machine performs it on every single transaction that it completes for a customer
 
06. A water treatment controller exchanges setpoints with a plant-wide SCADA system that the project neither builds nor owns. Shift technicians operate the controller, and one of them, Alvarez, works nights. The controller runs its own alarm-handling subsystem.
Which of these is drawn as an actor on the use case diagram?
a) The alarm-handling subsystem, because it decides entirely on its own what to do as soon as a threshold is crossed
b) The SCADA system, because an actor need not be human and this one sits outside what the project builds
c) The setpoint values, because they pass across the boundary between the two systems
d) Alvarez, because he is the person who operates the controller at night
 
07. An avionics program keeps its shared safety requirements in a platform package, and a product model reuses one of them through a «copy» whose master is the platform requirement.
The platform team reissues the master with new wording. What does the product model then hold?
a) Its wording changed to match, because the copy's text is read-only against its master, while its id stays its own
b) Its wording unchanged, until a product engineer edits the copy to bring it into line
c) Its wording changed to match, and the master's id carried across with it as well
d) Its wording unchanged, because a copy takes the master's text once, at the moment the link is drawn
 
08. Book Seat, Refund Ticket and Change Booking each carry out the same passenger authentication steps. The modeler pulls those steps into a use case of their own so they are described once.
Which relationship joins each of the three to it?
a) «refine»
b) «extend»
c) «include»
d) Generalization
 
09. On the use case diagram of an airline check-in kiosk, Print Boarding Pass is joined to Check In by an «extend» relationship.
What does that say about Check In?
a) Check In is complete on its own, and the printing behavior is added only where its condition holds
b) Check In makes precise what a printing requirement was asking for
c) Check In always carries out the printing behavior as one of its own steps
d) Check In is a kind of Print Boarding Pass and inherits the steps it describes
 
10. The block Braking System has a large internal structure. The team wants one diagram showing its hydraulic path and a second showing its signal path, each leaving out the parts the other draws.
What does SysML allow here?
a) A block can be the scope of a single internal block diagram, so the signal path needs a block of its own
b) Two internal block diagrams can be scoped to that one block, showing different parts of its structure
c) The second diagram must repeat everything the first one shows and add the signal path to it
d) Both paths belong on one diagram, since the internal structure a block has is the one its diagram draws

Answers:

Question: 01
Answer: a		 Question: 02
Answer: d		 Question: 03
Answer: b		 Question: 04
Answer: b		 Question: 05
Answer: a
Question: 06
Answer: b		 Question: 07
Answer: a		 Question: 08
Answer: c		 Question: 09
Answer: a		 Question: 10
Answer: b

If you find any errors or typos in OMG-Certified Systems Modeling Professional - Model Builder - Fundamental (OMG-OCSMP-MBF200) sample question-answers or online OMG SysML MBF practice exam, please report them to us on feedback@processexam.com

Your rating: None Rating: 4.8 / 5 (112 votes)